The Science Behind BIOMIM

Engineered at the Atomic Scale.

A deep-dive into BIOMIM's solid-state cell architecture — from materials science and electrolyte chemistry to manufacturing process and validated performance benchmarks.

Cell Architecture

Four Layers. One Breakthrough.

Every component of the BIOMIM cell is co-engineered for compatibility and performance. There are no off-the-shelf materials — each layer is developed in-house and optimised for the complete stack.

01

Ceramic-Composite Solid Electrolyte

BIOMIM's proprietary ceramic-composite electrolyte replaces the liquid separator entirely. Engineered from a lithium-stuffed garnet oxide lattice, it achieves ionic conductivity exceeding 10 mS/cm at room temperature — matching liquid electrolytes while eliminating every failure mode associated with them. The material is synthesised in-house using a scalable sol-gel process, enabling consistent batch quality at production volumes.

02

High-Voltage Cathode Architecture

Our cathode design leverages a nickel-rich layered oxide (NMC 90/5/5) with a conformal ceramic coating that prevents electrolyte decomposition at high voltages. This enables stable operation above 4.5V vs. Li/Li+ — unlocking energy densities impossible with conventional liquid electrolyte systems. The coating process is integrated into the electrode manufacturing line, adding no additional process steps.

03

Lithium Metal Anode

BIOMIM cells use a thin-film lithium metal anode — the theoretical maximum for anode energy density. The solid electrolyte interface suppresses lithium dendrite formation, the primary failure mechanism that has historically made lithium metal anodes impractical. Our proprietary stack pressure management system maintains uniform contact across the anode surface throughout the cell's service life.

04

Scalable Stack Manufacturing

The BIOMIM cell stack is manufactured using a continuous roll-to-roll process adapted from established thin-film deposition techniques. Each layer — anode, electrolyte, cathode — is deposited and calendered in a single integrated line, eliminating the multi-step assembly process that drives cost in conventional solid-state approaches. Throughput targets of 1 GWh/year per line are validated at pilot scale.

Performance Benchmarks

Numbers That Speak for Themselves.

All benchmarks are validated at cell level under automotive test protocols (IEC 62660, ISO 12405). Data available under NDA for qualified OEM partners.

500+Wh/kg
Gravimetric Energy Density
vs. 250-300 Wh/kg for best-in-class Li-ion
10,000Cycles
Cycle Life at 80% DoD
vs. 1,500-3,000 cycles for conventional cells
15min
10-80% Charge Time
vs. 45-60 min for standard fast-charge Li-ion
-40Cto +120C
Operating Temperature Range
vs. -20C to +60C for liquid electrolyte cells
0Events
Thermal Runaway Incidents
No liquid electrolyte — no runaway pathway
<10%Degradation
Capacity Loss at 10,000 Cycles
vs. 20-30% for standard Li-ion at equivalent cycles

* All data from internal validation testing. Independent third-party verification available upon request under mutual NDA.

Manufacturing Process

Designed for Production Scale.

The most common objection to solid-state batteries is manufacturability. BIOMIM was founded to solve exactly this problem. Our continuous roll-to-roll deposition process eliminates the batch sintering steps that make competing solid-state approaches economically unviable at scale.

Each manufacturing line is designed to produce 1 GWh/year of cell capacity, with a capital cost per GWh comparable to established lithium-ion gigafactories. The process is ISO/TS 16949 certified and validated for automotive supply chain integration.

1 GWh
Per Line Annual Capacity
ISO/TS
16949 Certified
R2R
Roll-to-Roll Process
<5%
Yield Loss Target
BIOMIM battery cell manufacturing line

BIOMIM pilot manufacturing facility — 100 MWh/year capacity

Ceramic electrolyte material synthesis
R&D Milestones

Seven Years of Relentless Progress.

2019

Founded. Core ceramic electrolyte synthesis IP filed.

2020

First pouch cell prototype exceeds 400 Wh/kg at lab scale.

2021

Series A. Pilot manufacturing line commissioned.

2022

10,000-cycle validation completed. First OEM engagement signed.

2023

Series B. 100 MWh/year pilot line operational.

2024

ISO/TS 16949 process certification achieved. 12 OEM engagements active.

2025

GWh-scale manufacturing line groundbreaking. Supply agreements in negotiation.

2026

Production-scale cell delivery to first OEM partner. Target: Q3 2026.

Technical Data Package

Request Full Specifications

Qualified OEM partners and tier-one suppliers can request our complete technical data package — including full cell characterisation data, manufacturing process documentation, and supply chain integration guide.

BIOMIM Technologies

Engineering the next generation of solid-state battery technology for the electrified world.

Precision. Performance. Partnership.

© 2026 BIOMIM Technologies. All rights reserved.

Solid-State Battery R&D & Manufacturing